DESIGN
The 700 series rotary flow meter has a simple and efficient meter design consisting of a housing and three rotors that rotate in unison within the measuring chamber. The absence of wear, from no metal-to-metal contact inside the chamber, eliminates any deterioration in accuracy and provides a long service life. The rotors are supported by bearings inserted into two bearing plates, where at the end of each rotor shaft is a timing gear. The timed rotation between each rotor is then transferred through the calibration adjuster to the register, which will then give a consistent and superior measurement of accuracy.

FEATURES
• No metal-to-metal contact within the measuring chamber
- Low Pressure Drop
- Low Maintenance
- Long Service Life
• Light and Compact Design
• Bi-directional Flow Direction
• Wide Viscosity Range - up to 1,500,00 SSU (325,000 CPS)
• Meets NIST, OIML and many other international weights & measures - NMI Approved for Re-Sale / ATO Claims 

SPECIFICATIONS
Design: Three (3) Rotors
Meter Types: SP, SPA, SPD, LP, IC, IP, AF & SS
Linear Accuracy: 5:1 Turndown - capable of ± 0.100% of maximum nominal flow rate
                        10:1 Turndown - capable of ± 0.125% of maximum nominal flow rate
                         15:1 Turndown - capable of ± 0.150% of maximum nominal flow rate
Repeatability: 0.05% over 15:1 turndown
Pressure: 150 PSI (10.5 BAR)
               350 PSI (25 BAR) 700-20 LP METER TYPE ONLY
Temperature: - 40 to 160°F (- 40 to 71°C)
Material: Aluminum, Ductile Iron & Stainless Steel
Seals: Viton®, Teflon®, Simriz® & UL Buna

METER TYPES
SP Standard Petroleum
Gasoline, Fuel Oils, Diesel, Bio-Diesel, Kerosene, Jet Fuels, Vegetable oils, Motor Oils, Ethylene Glycol, Naptha etc.

SPA Standard Petroleum - Aviation
Aviation Gasoline, Gasoline, Jet Fuels, Fuel Oils, Diesel, Bio-Diesel, Kerosene, Naptha, etc.

SPD Standard Petroleum - Ductile (Nodular) Iron
Ethanol, Methanol, Aviation Gasoline, Gasoline, Diesel, Bio-Diesel, Fuel Oils, Kerosene, Vegetable Oils, Motor Oils, Naptha, etc.

LP Liquefied Petroleum Gas
Liquefied Petroleum Gas (LPG), Butane, Freon, etc.

IC Industrial Products (Carbon Bearings)
Industrial Chemicals, General Solvents, Water, Alcohols, Acetones, MEK, Toluene, etc.

IP Industrial Products (SS Bearings)
Industrial Chemicals, General Solvents, Liquid Sugars, Corn Syrup, Soybean Oil, Shortenings, Latex Products, Adhesives, etc.

AF All Ferrous
Industrial Chemicals, Solvents, Pesticides, Nitrogen Solutions, Fertilizer, Chlorinated Solvents, Paints, Inks, Alcohols, Adhesives, Molasses, Corn Syrup, etc.

SS Stainless Steel
Industrial Chemicals, Solvents, Nitric Acid, Phosphorus Acid, Glacial Acetic Acid, Anti-Icing Fluid, Vinegar, Fruit Juices, etc

PRODUCT RANGE

700-15	Flow Capacity: 5 to 60 GPM (19 to 227 LPM) Meter Type: SP, SPA, IC & IP Flange Size: 1-1/2”, optional 1” or 2”
700-20	Flow Capacity: 10 to 100 GPM (38 to 380 LPM) Meter Type: SP, SPA, SPD, LP, IC, IP, AF & SS Flange Size: 2”, optional 1-1/2”
700-25	Flow Capacity: 10 to 150 GPM ( 38 to 567 LPM) Meter Type: SPA & SPD Flange Size: 2”
700-30	Flow Capacity: 20 to 200 GPM (76 to 760 LPM) Meter Type: SP, SPA, SPD, IC, IP & AF Flange Size: 3”, optional 2”
700-35	Flow Capacity: 20 to 300 GPM (76 to 1135 LPM) Meter Type: SPA & SPD Flange Size: 3”
700-40	Flow Capacity: 40 to 500 GPM (151 to 1893 LPM) Meter Type: SP, SPA, SPD, IC, IP & AF Flange Size: 4”, optional 3”
700-45	Flow Capacity: 40 to 600 GPM (151 to 2271 LPM) Meter Type: SPA & SPD Flange Size: 4”

REGISTER OPTIONS

PLC or digital controllers for fluid process management. Stock or customized units are available from our UL 508A approved engineered systems.
MID:COM is a leading manufacturer of electronic meter registers, on board computers and accessories. The most common applications are on Propane and Petroleum delivery trucks.
Veeder-Root is the leading manufacturer of Meter Registration products throughout the world, now with the Electronic Registration EMR3.
The 7887 Meter Register totalizes and displays high speed deliveries and transactions in large, 3/4" easy-to-read figures. Displays a 5 digit resettable totalizer and 8 digit non-resettable totalizer
Meter Register and Ticket Printer combine to produce clean, detailed printed records of high-speed fluid deliveries and transactions
The Meter Register and Preset Counter provide automatic preset batch control. The control function will shut-off (2-stage) when predetermined quantity is delivered.
The Micro Switch assembly has two double chamber internal switches to provide Full Flow, Low Flow and Off Control for the 7889 preset counters.
The dry reed (1:1 or 10:1) and solid state (100:1) pulse transmitters provide fast and accurate signaling for remote indication, totalizing and data monitoring systems
This swivel adaptor allows the register to be rotated to any desired angle before delivery or while meter is operating.
Tray switch prevents a pump or valve from turning on until the register counter has been reset. Also used for resetting external digital displays after a transaction is finalized.